[Include all carton sealing application information on a single page?]
Carton Sealing
Photoelectric quality control assures that all cartons passing
through the control point on a conveyor are properly sealed. Improper
seals on cartons are easily spotted by a photoelectric scanner mounted
above the conveyor. Improperly sealed carton are automatically
ejected from the conveyor.
After cartons are sealed, the conveyor takes them through the
''flap lifter'', which is a thin, stiff, flexible arm that slides
along side of the container, pushing up any unsealed flaps on the side
of the container. As each carton passes, flaps not securely glued are
caught bey the flap lifter and lifted to break the photoelectric light
beam. An ejecting device then removes the improperly sealed carton.
Where cartons have flaps on both sides, two flap lifters are used,
either of which will operate the ejector.
Products
Photoelectric (CPF303) ELD41 P380
Technology
Photoelectric
Other Applications
Stack To Size Trash Compactor Showers Restrooms Drive Through Customer Detection Product Under Speed Space Adjustment Jam Up With Delayed Restart Conveyor Jam Up Parts Interrupt Beam Diverting Equal Batches Direction Detection Laundry Automatic Delivery By Count Converging Conveyors Large Area Clearance End Of Roll Winding Roll To Length Cut To Length Shaft Rpm Spacing Glue Deposits Fill By Weight Page Skew Symmetrical Tubes By Time Register Marks Transparent Objects High Speed Steel Sheets Short Dark Time High Speed Small Objects Small Gap Between Parts Product Inspection Protruding Loose Parts Automatic Extruder Fixed Ejection Path Dish Inspection Automatic Spraying Machine Processing Check Wire Break Detection Tear Detection Heavy Rubber Sheet Wide Cloth
Autotron Group, Elwood Corporation Wisconsin, USA. telephone: 1-414-764-7500 |